Back
Installation Instructions
Return to Traditional Hinges
316 Marine Grade Stainless Steel Cranked Bands Hinges
Back
Available in 16"and 24" Lengths. 16" has 1/2" pin, 24" has 5/8" pin.
16" band width is 1.6" with mounting plate size of 1.6" W x 5.25" H, 24" band width is 2" and mounting plate size of 2" W x 6.5" H
Very Robust Traditional design. Sold in Pairs
Can be used mounted flush with the front of the post or when the gate needs to be setback from the front of the post and still have a tight fit (as little as 1/8") between the gate and the post.
If installed with both pins up then the gate can be removed easily. Installing one pin down prevents removal of the gate.
Satin finish 316 Grade stainless steel or Black Polyester Powder Coat over 316 stainless steel finish
2" #12 wood screws are included.
Carriage Bolts. Hinges require a carriage bolt (preferred) or a lag bolt be used on each hinge. These are not included as the length required will vary with the installation.
Cranked Bands with Pins Flush Mounted diagram
Cranked Bands with Pins Setback or Jamb Mounted diagram
Click Diagrams to Enlarge
Back
Return to Traditional Hinges
316 Marine Grade SS Cranked Bands Hinges
Back
Available in 16"and 24" Lengths. 16" has 1/2" pin, 24" has 5/8" pin.
Very Robust Traditional design. Sold in Pairs
Can be used mounted flush with the front of the post or when the gate needs to be setback from the front of the post and still have a tight fit (as little as 1/8") between the gate and the post.
If installed with both pins up then the gate can be removed easily. Installing one pin down prevents removal of the gate.
Satin finish 316 Grade stainless steel or Black Polyester Powder Coat over 316 stainless steel finish
2" #12 wood screws are included.
Carriage Bolts. Hinges require a carriage bolt (preferred) or a lag bolt be used on each hinge. These are not included as the length required will vary with the installation.