Back
Click for Installation Instructions

Click for Product Drawing & Specifications
Return to Traditional Hinges
Cranked Bands & Hooks Hinges &
Cranked Bands with Pins Hinges
Back
•
Available in 12", 18", 24" & 36" Lengths
•
Very Robust Traditional design. Sold in Pairs
•
Can be used mounted flush with the front of the post or when the gate needs to be setback from the front of the post and still have a tight fit (as little as 1/8") between the gate and the post.
•
If installed with both pins up then the gate can be removed easily. Installing one pin down prevents removal of the gate.
•
Hot Dipped Galvanized (HDG) or Black Polyester Powder Coat over HDG (BPPCG) finish
•
This style of hinge has a loose fit on the pin.This slackness will not be evident when both hinges are mounted.
•
Galvanized Hinges include 2" #12 Dacromet screws, Black Polyester Powder Coat over Galvanized (BPPCG) 2" #12 Wood Screws.
Carriage Bolts. Hinges require a carriage bolt (preferred) or a lag bolt be used on each hinge. These are not included as the length required will vary with the installation. The use of hot dipped galvanized bolts or lags is recommended. 
Get Carriage Bolts HERE.
Cranked Bands with Pins Flush Mounted diagram
Cranked Bands with Pins Setback or Jamb Mounted diagram
Click Diagrams to Enlarge
Back
Return to Traditional Hinges
Cranked Bands with Pins Hinges
•
Available in 12", 18", 24" & 36" Lengths
•
Very Robust Traditional design. Sold in Pairs
•
Can be used mounted flush with the front of the post or when the gate needs to be setback from the front of the post and still have a tight fit (as little as 1/8") between the gate and the post.
•
If installed with both pins up then the